Rope Inc. rope and wire
For All Cordage and Wire Needs
T 900 Rope

Racing Lines
Marine Racing Boats Rope

Rope inc. provides T 900 Rope from New England Ropes. Contact Us to quote availabilites and pricing for your racing needs.

See T 900 Rope for racing from New England Ropes supplied by Rope Inc. below.

T 900 ROPE


T 900 Rope  
View Larger Image

Product Description:
Unique double braid construction consisting of a 12 stand core of blended Technora and Dyneema SK-75 with a polyester cover. Blending the two core fibers reduces the effects of some of the properties exhibited by these fibers when used exclusively in a rope.

Get Price


  • High strength
  • Low stretch
  • Low Creep
  • Spliceable


  • Halyards
  • Guys

Colors Available:

  • White
  • Red Fleck
  • Blue Fleck
  • Green Fleck

Lengths Available:

  • 600'

 1/4" (6mm) 2.4 35.7 4,400 1,998
 5/16" (8mm) 3.2 47.6 7,300 3,314
 3/8" (10mm) 5.2 77.4 11,800 5,357
 7/16" (11mm) 5.8 86.3 14,300 6,492
 1/2" (12mm) 6.6 98.2 17,000 7,718
 9/16" (14mm) 9.5 141.4 23,100 10,487
 5/8" (16mm) 11.6 172.6 30,200 13,711
 3/4" (18mm) 14.4 214.3 37,500 17,025
 7/8" (22mm) 20.5 305.0 60,000 27,240
 1" (24mm) 27.6 410.7 65,000 29,510
 26mm 30.0 446.4 80,000 36,320

Very little degradation from sunlight. Can be used outside over long term if inspected regularly.

Polyester has good resistance to most chemicals except 95% sulfuric acid and strong alkalines at boil. HMPE has good resistance to most minerals, organics, acids, and weak alkalines. HMPE also has excellent resistance to bleaches and other oxidizing agents and to most solvents.

Polyester melts at 480°F with progressive strength loss above 300°F. HMPE melts at 300°F with progressive strength loss above 150°F. Technora melts at 1200' F.

Good resistance to the passage of electrical current. However, dirt, surface contaminants, water entrapment, and the like can significantly affect dielectric properties. Extreme caution should be exercised any time a rope is in the proximity of live circuits.

Recommended sheave diameter to rope diameter is 8:1.

Working Loads:
No blanket safe working load (SWL) recommendations can be made for any line because SWL's must be calculated based on application, conditions of use, and potential danger to personnel among other considerations. It is recommended that the end user establish working loads and safety factors based on best practices established by the end user's industry; by professional judgment and personal experience; and after thorough assessment of all risks. The SWL is a guideline for the use of a rope in good condition for non-critical applications and should be reduced where life, limb, or valuable property is involved, or in cases of exceptional service such as shock loading, sustained loading, severe vibration, etc. The Cordage Institute specifies that the SWL of a rope shall be determined by dividing the Minimum Tensile Strength of the rope by a safety factor. The safety factor ranges from 5 to 12 for non-critical uses and is typically set at 15 for life lines.

Splicing Instructions:
Core-to-Core Splice

Product Datasheet
Product Information


Disclaimer: Specifications and prices are believed accurate but must be confirmed upon ordering.

Contact Us to quote availabilites and pricing for your racing rope needs.
Search this Site!

Click A Flag For Translation


Rope inc.
262 SW 33rd Street
Fort Lauderdale FL  33315
Tel 888-596-7673
Tel (954) 525-6575
Fax (954) 525-5887