Rope Inc. rope and wire
For All Cordage and Wire Needs
Endura Braid Rope

Racing Lines
Marine Boats Racing Rope

Rope inc. provides Endura Braid Rope from New England Ropes. Contact Us to quote availabilites and pricing for your racing needs.

See Endura Braid Rope for racing from New England Ropes supplied by Rope Inc. below.


ENDURA BRAID ROPE

Endura Braid

Endura Braid Rope  
View Color Choices

Product Description:
Specially engineered 12 Strand Dyneema SK 75 core with Marine-Tech coating and the sports best 24 carrier braided polyester cover.

Get Price

Features:

  • Excellent strength-to-size ratio
  • Ultra low elongation
  • Excellent wet/dry strength retention

Applications:

  • Sheets
  • Halyards
  • Guys
  • Topping lifts
  • Reef Lines
  • Low-stretch control lines

Colors Available:

  • White
  • Solid Green
  • Solid Red
  • Solid Blue
  • Solid Black
  • Green Fleck
  • Red Fleck
  • Blue Fleck

Lengths Available:

  • 600'

SizeWeightTensile
lbs/100'g/mlbskg
 3/16" (5mm) 1.0 14.9 2,250 1,022
 1/4" (6mm) 1.9 28.5 4,000 1,816
 5/16" (8mm) 2.7 40.2 7,000 3,178
 3/8" (10mm) 4.5 67.0 10,000 4,540
 7/16" (11mm) 5.5 81.8 14,000 6,356
 1/2" (12mm) 6.7 99.7 19,000 8,626
 9/16" (14mm) 8.6 128.0 25,200 11,441
 5/8" (16mm) 11.7 174.1 30,000 13,650
 3/4" (18mm) 15.8 235.1 37,400 16,980
 7/8" (22mm) 20.0 297.6 53,000 24,062
 1" (24mm) 26.0 386.9 71,000 32,143
 1 1/8" (28mm) 35.3 525.3 90,200 44,764

Sunlight/UV:
Very little degradation from sunlight. Can be used outside over long term if inspected regularly.

Chemicals:
Polyester has good resistance to most chemicals except 95% sulfuric acid and strong alkalines at boil. HMPE has good resistance to most minerals, organics, acids, and weak alkalines. HMPE also has excellent resistance to bleaches and other oxidizing agents and to most solvents.

Heat:
Polyester melts at 480°F with progressive strength loss above 300°F. HMPE melts at 300°F with progressive strength loss above 150°F.

Dielectrics:
Good resistance to the passage of electrical current. However, dirt, surface contaminants, water entrapment, and the like can significantly affect dielectric properties. Extreme caution should be exercised any time a rope is in the proximity of live circuits.

Sheaves:
Recommended sheave diameter to rope diameter is 8:1.

Working Loads:
No blanket safe working load (SWL) recommendations can be made for any line because SWL's must be calculated based on application, conditions of use, and potential danger to personnel among other considerations. It is recommended that the end user establish working loads and safety factors based on best practices established by the end user's industry; by professional judgment and personal experience; and after thorough assessment of all risks. The SWL is a guideline for the use of a rope in good condition for non-critical applications and should be reduced where life, limb, or valuable property is involved, or in cases of exceptional service such as shock loading, sustained loading, severe vibration, etc. The Cordage Institute specifies that the SWL of a rope shall be determined by dividing the Minimum Tensile Strength of the rope by a safety factor. The safety factor ranges from 5 to 12 for non-critical uses and is typically set at 15 for life lines.

Splicing Instructions:
Core-to-Core Splice

 

Disclaimer: Specifications and prices are believed accurate but must be confirmed upon ordering.

Contact Us to quote availabilites and pricing for your racing rope needs.
Search this Site!

Click A Flag For Translation

HOME PRODUCTS CATALOG INFO NEWS SUPPLIERS CONTACT

Rope inc.
262 SW 33rd Street
Fort Lauderdale FL  33315
Tel 888-596-7673
Tel (954) 525-6575
Fax (954) 525-5887