Rope Inc. rope and wire
For All Cordage and Wire Needs
3 Strand Nylon Rope

Anchoring and Dock Lines
Marine Boats Anchoring Rope

Rope inc. provides 3 Strand Nylon Ropes from New England Ropes. Contact Us to quote availabilites and pricing for your anchoring needs.

See 3 Strand Nylon Ropes for anchoring and dock lines from New England Ropes supplied by Rope Inc. below.


3 STRAND NYLON ROPE

3-Strand Nylon

Apex Dynamic Rope  
View Larger Image

Product Description:
Manufactured from premium grade high tenacity nylon fiber treated with a proprietary Marine-Tech coating to improve fiber-to-fiber abrasion resistance.

Get Price

Features:

  • Long wearing
  • Supple, easy to handle
  • Excellent abrasion resistance
  • Available spliced and packaged as anchor line or doc

Applications:

  • Dock Lines
  • Anchor Lines
  • Mooring Lines

Colors Available:

  • White
  • Black
  • Navy

Lengths Available:

  • 1200'
  • 600'

SizeWeightTensile
lbs/100'g/mlbskg
 3/16" 1.0 14.9 1,200 545
 1/4" 1.5 22.3 2,000 908
 5/16" 2.5 37.2 3,000 1,362
 3/8" 3.5 52.1 4,400 1,998
 7/16" 5.0 74.4 5,900 2,679
 1/2" 6.5 96.7 7,500 3,405
 9/16" 8.2 122.0 9,400 4,268
 5/8" 10.0 148.8 12,200 5,539
 3/4" 13.6 202.4 16,700 7,582
 7/8" 18.7 278.3 23,500 10,669
 1" 26.4 392.8 29,400 13,348
 1-1/8" 30.6 455.3 34,000 15,436

Sunlight/UV:
Very little degradation from sunlight. Can be used outside over long term if inspected regularly.

Chemicals:
Nylon will degrade with strong oxidizing agents, mineral acids, and 90% formic acid. May discolor when exposed to high levels of carbon dioxide.

Heat:
Nylon melts at 460°F with progressive strength loss above 300°F.

Dielectrics:
Good resistance to the passage of electrical current. However, dirt, surface contaminants, water entrapment, and the like can significantly affect dielectric properties. Extreme caution should be exercised any time a rope is in the proximity of live circuits.

Sheaves:
Recommended sheave diameter to rope diameter is 8:1.

Working Loads:
No blanket safe working load (SWL) recommendations can be made for any line because SWL's must be calculated based on application, conditions of use, and potential danger to personnel among other considerations. It is recommended that the end user establish working loads and safety factors based on best practices established by the end user's industry; by professional judgment and personal experience; and after thorough assessment of all risks. The SWL is a guideline for the use of a rope in good condition for non-critical applications and should be reduced where life, limb, or valuable property is involved, or in cases of exceptional service such as shock loading, sustained loading, severe vibration, etc. The Cordage Institute specifies that the SWL of a rope shall be determined by dividing the Minimum Tensile Strength of the rope by a safety factor. The safety factor ranges from 5 to 12 for non-critical uses and is typically set at 15 for life lines.

Splicing Instructions:
3-Strand Eye Splice

Product Datasheet
Product Information

 

Disclaimer: Specifications and prices are believed accurate but must be confirmed upon ordering.

Contact Us to quote availabilites and pricing for your boating rope needs.
Search this Site!

Click A Flag For Translation

HOME PRODUCTS CATALOG INFO NEWS SUPPLIERS CONTACT

Rope inc.
262 SW 33rd Street
Fort Lauderdale FL  33315
Tel 888-596-7673
Tel (954) 525-6575
Fax (954) 525-5887